CLEARBORE - 5kg - Water Bore & Pump Cleaner

Code: 811139

Print
Product Code
CLE-CLEARBORE-5KG
Technical Specifications
Brand Clearbore
Product Type Borehole Pump Cleaner
Size 5kg
Description

CLEARBORE
THE LEADING WATER BORE AND WATER PUMP CLEANING SOLUTION.
Clearbore is a safe, simple to use, biodegradable and effective product for cleaning water bores and water pumps.

The biofilm and encrustations in water bores, pumps and irrigation equipment caused by dissolved iron and iron-related bacteria are simply dissolved away by Clearbore water bore cleaner. Clearbore is a safe, biodegradable and effective product for cleaning water bores and water pumps.

Clearbore products are safe, simple to use and completely biodegradable. They contain no chlorine, hydrochloric acid, copper or cupric solutions.

Features
  • Australian Made
  • Biodegradable
  • Granular Product
  • Test Kit Supplied
  • Cost Effective
  • Range of Sizes
  • Performance Guaranteed
  • Easy to use



CLEARBORE DOSAGE CALCULATION:

Depth of bore minus standing water level (SWL) = metres of water
Find grams required per diameter from the above table = grams/metre
Multiply metres of water x grams/metre = dosage in grams
Divide dosage in grams by 1000 = dosage in kilograms

CLEARBORE DOSAGE EXAMPLE:

Example – a 150mm diameter bore, depth 70m, SWL 20m.
Metres of water = 70-20 = 50m
50m x 880grams = 44000grams, divide by 1000 = 44kg Clearbore

CLEARBORE IN THE WORKSHOP
Apart from cleaning bores and submersible pumps, this one product can also be used to clean pipes, drippers and drip lines, filters and screens. In fact all irrigation parts and fittings – in the field and in the workshop.

A solution of 1-part Clearbore to 20-parts water can be recirculated through pipelines to leave pipes and fittings completely clean and allowing maximum flow. (A slight build-up may only need a 1 to 40-part solution.) We recommend using Clearbore every twelve months to keep pipelines clean.

In the workshop, a solution of 1-part Clearbore to 10-parts water can be used to clean sprinkler heads, drippers, inoperable and dismantled pumps, pipe fittings, bore screens, filters and baffles, in fact any part of your irrigation system. In many cases, an inoperable pump will work after being cleaned by this method. The solution can be used over and again, depending on how much iron there is to be removed. A lid kept on the solution will reduce the breakdown of the active ingredients.

To clean the iron from a working pump, there is no need to dismantle it. Simply place the pump in a container large enough to hold it, and fill with a 1 to 10-part solution of Clearbore. Turn the pump on and allow the Clearbore to clean the pump. Again, the solution can be reused.

Once the solution no longer performs, empty the container onto waste ground and allow it to biodegrade. In the presence of UV light and air, Clearbore breaks down to carbon dioxide and water – completely safe for the environment.

BORE CLEANING DOSAGE TABLE FOR CLEARBORE
Diameter of Bore / Pipeline
(mms / inches)
Amount of Clearbore per Metre of Water
(gms/Kg)
25mm / 1" 24g
40mm / 1.5" 62g
50mm / 2" 98g
80mm / 3" 250g
100mm / 4" 390g
125mm / 5" 610g
150mm / 6" 880g
200mm / 8" 1.57 Kg
250mm / 10" 2.45 Kg
300mm / 12" 3.53 Kg
350mm / 14" 4.80 Kg
400mm / 16" 6.25 Kg
450mm / 18" 7.95 Kg
500mm / 20" 9.81 Kg
Product Range Brochure
Downloads
Certificates & Compliance Information
Download Certificates & Compliance Information v1.0

Similar Products