Code: 805127

Technical Specifications

Brand	Bianco Rainsaver
Product Type	Rain Harvesting Kit
Suitable For	Clean Water
Flow Range Category	a. 0 - 99 L/min
Float	No
Max Flow (L/min)	50
Max Head (m)	38
Port Size Inlet	3/4" Rainsaver
Port Size Outlet	3/4" Rainsaver
Powered	Electric
Volts	240
Warranty (months)	24

Description

The RAINSAVERMK6 is an Automatic Rainwater / Mains Water Changeover Device designed to provide automatic mains back up for Pressure Pump supply systems. The RAINSAVERMK6 is designed to be installed in conjunction with a Pressure Pump supply system that is fitted with an independent pressure and flow controller with loss of prime protection and 24 hour auto restart.

Specifications – BIA-INOX45S2MPCX
The pump is a self-priming pressure system pump supplied wired and ready to install. The self-priming ability provides excellent suction capacity. Used especially for supplying water to domestic installations.

The pump is characterised by:

Automatic electronic pump control fitted and wired.
Automatic electronic control provides run dry protection and constant pressure at low flows. Automatic electronic control has in-built check valve & auto restart.
Corrosion resistant pump body, diffuser and impeller.
Mechanical shaft seal.
240V single phase TEFC motor with in-built auto reset thermal overload.

Operation

The RAINSAVERMK6 supplies clean rainwater from a rainwater tank via an automatic pressure system pump to toilets, laundry and garden taps in a household. Mains water is also connected to the RAINSAVERMK6 as an automatic back up should rain water level be too low, or if there is a power or pump failure.

Downloads

Control Features

Control Features:

Proven components
Requires no power supply and consumes no electrical energy
Designed to operate with pumps and mains up to 1000 kPa (145 psi)
Pump flows to 105 l/m, mains flows to 40 l/m (at 500kPa mains)
Designed to further save water resources by reducing incoming mains to 200 kPa
Requires no weather proofing
Can be mounted any distance from the pump underground or inside a tank
Completely waterproof - Can be hosed down without the fear of electrocution
UV stabilised technopolymer for long life and good looks
All Rainsaver MK6 pumps are independently controlled to regulate flows and pressures whilst protecting the pump against voltage fluctuations, loss of water and incorporate a 24 hour automatic pump restart
WaterMark approved components for connection to all Town Water supplies. Safe against water borne bacteria, dezincification and lead poisoning
No unsightly controller power, water level float cables or the need for a dedicated controller power point
Australian owned and designed

Warranty

2 Year Rainsaver MK6 Warranty

Approvals

WaterMark Approved

WATERMARK APPROVAL - ATS 5200.477:2006.

The WaterMark Certification Scheme is a mandatory certification scheme for plumbing and drainage products to ensure that plumbing and drainage materials and products are fit for purpose and appropriately authorised for use in plumbing installations.

The Plumbing Code of New Zealand requires certain plumbing and drainage materials and products to be certified and authorised for use in a plumbing or drainage installation. These materials and products are to be certified through the WaterMark Certification Scheme and listed on the WaterMark Product Database.

In order to achieve Watermark Certification, the subject material or product must:

be tested by a recognised testing laboratory;
comply with an approved specification (either a relevant existing standard or an approved WaterMark Technical Specification);
be manufactured in accordance with an approved Quality Assurance Program; and
carry a warranty.

Materials and products complying fully with the applicable requirements of the WaterMark Certification Scheme are then eligible to be certified by a WaterMark Conformity Assessment Body (WMCAB) and listed on the WaterMark Product Database.

Certified materials and products are identifiable by the WaterMark trademark, which must be displayed on the material or product upon the granting of a WaterMark Certificate of Conformity.

Notes

Pressure Systems calculated at 10 L/m

RAINSAVER MK6 - Not for sale seperately

RS6-INOX45S2MPCX RAINSAVER MK6PUMP KIT CLEAN WATER DOMESTIC 50L/MIN 38M 240V

Code: 805127

Product Code