Ecosoft FNA 2162 Auto Neutralising Filter

Code: 811166

Print
Product Code
FNA-2162CE125
Technical Specifications
Series FNA Series
Description

The FNA Series neutralising filter in 2162 size is usually used for pH correction in commercial environments.


Benefits of pH corrected water
  • Pipes and chattels are protected from damage due to corrosion
  • Reduced risk of consuming undesirable metal contaminants
  • Uses a naturally-occurring mineral
  • No need for chemical intervention
  • Calcite is unlikely to overcorrect
  • Effective in pH range 6.0-6.9
System Specifications FNA-2162CE125
Nominal Flow Rate 136lpm
Media Quantity (Gravel)
Media Quantity (Calcite)
Backwash Flow Rate
Basckwash Duration
Backwash Discharge Volume
Pressure Drop in Service Mode 1.0 - 1.5 bar
Inlet/Outlet Size 1.25" NPT
System Dimensions (width x height)
Features
FNA Series Neutralising Filters

Neutralising filters are designed specifically to increase pH and prevent corrosion while also increasing beneficial minerals like calcium.

FNA series neutralising filters include a fully-automated backwash to ensure that your unit does not become blocked with sediment or suffer media clumping or packing. When paired with a bypass, these units are capable of maintaining your pH within the recommended levels, protecting your pipework and water using appliances. These units contain Calcite, a natural calcium carbonate-based media which slowly dissolves into water increasing pH, this media does need to be periodically replenished as the calcite is depleted.

These units are suitable for light commercial use. Larger units are also available on request.




Operating Specs
Water Temperature 4 - 30°C
Operating Pressure 2 - 6 bar
Recommended Pre-Filter Rating 100 micron
Operating Environment Indoor or outdoor with additional protection
Bypass Required Yes