Ecosoft FU 2162 Softener

Code: 811233

Print
Product Code
ECO-FU2162CE125
Technical Specifications
Brand Ecosoft
Product Type Softener
Flow Rate (L/min) 113
Inlet/Outlet 1.25"
Min Pressure (bar) 2.0
Max Pressure (bar) 6.0
Min Temp (degrees celsius) 4
Max Temp (degrees celsius) 30
Application Whole Supply
Filter Softener
Description

The FU series softener in 2162 size is useful for larger domestic applications and small-medium applications like dairy sheds, cafes, restaurants, motels etc. It is also suitable for large domestic or light commercial use. Volume processed between regenerations is determined by hardness level.

System Specifications FN2162CE
Nominal Flow Rate 113lpm
Media Volume 200L
Capacity 10,000g
Salt Consumption Per Regeneration 20kg
Water Consumption Per Regeneration 2000L
Regeneration Duration 90 - 120 minutes
Pressure Drop in Service Mode 1.0 - 1.5 bar
Power Consumption 30W
Inlet/Outlet Size 1.25" NPT
System Dimensions (height x width x depth) 183 x 131 x 62
Net Weight 300kg
Features
FU Series Softeners:

A range of robust water softeners that perform as well in rural commercial/industrial applications as it does in town.

Twin setups are also available on request in either alternating or parallel setups.

Equipped with a Clack control valves with special programing to make your life easier.

The brine drum and media are included.

Don’t forget to order salt for regeneration separately


Benefits of Soft Water

A water softener can make a real difference to your life by removing hardness from your water.

Here are just a few of the benefits you can gain from soft water:

  • Scale/water spot free kitchen and bathroom
  • Softener skin and hair
  • Savings on heating bills
  • Save on detergents, soaps, shampoo and conditioner
  • Less maintenance on appliances
  • Spend less time cleaning
Operating Specs
Operating Specs
Water Temperature 4 - 30°C
Operating Pressure 2 - 6 bar
Recommended Pre-Filter Rating 100 micron
Operating Environment Indoor or outdoor with additional protection


Requirements for Feed Water

Requirements for Feed Water
Maximum Hardness (mg/L = ppm = g/m3) 750
Maximum Iron (mg/L = ppm = g/m3) 0.2
Maximum Manganese (mg/L = ppm = g/m3) 0.05
Chemical Oxygen Demand (mg O2/L) 5.0
Required level of pre-filtration (microns) 100